You are here

Using the wired network in Appleton Tower, Forrest Hill and Wilkie

Printer-friendly versionPrinter-friendly version

General usage guidance

In addition to our overall computing Policies and guidelines:

  1. Users should never interfere with network ports which are in use. Please, never unplug a network cable from a network port so that you can use that port for some other purpose: doing so is contrary to the Computing Regulations. Specifically, please never interfere with the network cables of DICE desktop machines in the computing labs.
  2. Since it's important that an appropriate subnet is used for any particular machine, please don't arbitrarily connect a PC, laptop or similar device to any 'random' port not currently in use. If this document doesn't make clear the intended use of the port in question, or you're otherwise not clear about the intended use, please contact the Computing Support team.
  3. Please do not connect any networking equipment to any network port without asking for, and obtaining, prior approval. Doing so can disrupt the service for other users.
  4. In open areas of Appleton Tower levels 3 to 5, unused ports have been configured to be on VLAN ATopen, and are therefore available for use by students who want to use laptops and similar devices with a wired connection. Note that, for audit reasons, machines on this VLAN are given addresses from the RFC1918-range 192.168.105/24, which is routed within the University but not, of course, beyond. If you want to use a laptop to access the wider Internet, you should do so via a wireless connection instead.
  5. If you need clarification of network usage, or if you would like a network port reconfigured in some way, please contact the Computing Support team: they will be happy to help.

Subnets, VLANs, and network ports

The School of Informatics has some 40 or so different IP subnets in use, each of which serves a particular purpose, and each of which is carried on a particular VLAN (i.e. a logical 'piece of ethernet'). In turn, each of the network ports you see around the building will - if active at all - have been configured to be on a particular VLAN.

It is important that an appropriate subnet is used for any particular machine. For example, in Appleton Tower, students' laptops and other similar devices generally belong on the 192.168.105.0/24 subnet, which is carried on VLAN 'ATopen' - so any such device must be connected to a network port which has been configured to be on VLAN 'ATopen'.

Machines on the 'wrong' subnet, or an inappropriate network port, might just not work at all; and, even if they do, they probably won't acquire their expected IP configuration.

Normally, end users don't have to worry about the configuration of network ports to VLANs: the Computing Support team takes care of that. But knowing the subnet-to-VLAN mapping is useful, and helps to make sense of the information returned by the search facility on our Appleton Tower, Forrest Hill and Wilkie network monitoring page.

Further information

Last reviewed: 
27/01/2017

System Status

Home dirs (AFS)
Network
Mail
Other services
Scheduled downtime

Choose a topic